ND35 Industrial Series 30W Electric Flying Insect Light
2 in stock
FLYING INSECT LIGHT
TheIND35 Industrial Series 30W Electric Flying insect glue board light is ideal for commercial areas.
The system has a shatterproof lamp and is easy to install which can be wall mounted or free standing.
It has a large capacity GLUPAC pheromone impregnated Glueboard and it attracts the insects to the unique circular Ultraviolet tube which emits a wavelength of light.
The insects are then discreetly retained with a glueboard, its silent action is an effective way of controlling flying insects.
Pest Type: Flying insects – fruit flies, flies and moths.
Commercial – Commercial, factory, warehouse zones and glass-free areas. Please see direction recommendations for placement.
The IND35 Industrial Series 30W Electric Flying insect glue board light is ideal for commercial areas. The system has a shatterproof lamp and is easy to install which can be wall mounted or free standing. It has a large capacity GLUPAC pheromone impregnated Glueboard and it attracts the insects to the unique circular Ultraviolet tube which emits a wavelength of light. The insects are then discreetly retained with a glue board, its silent action is an effective way of controlling flying insects.
Dimensions – 510mm x 150mm x 235mm
Coverage – 120m2
High-efficiency shatterproof UV Synergetic tubes: Patented technology with dual wavelength output for an increased catch.
Tubes: 2 x T15GS 15W Shatterproof
Approval Insect Safety Standard Number: EN60335-2-59
Glueboards incorporate a UV stable dry glue for longer life and increase in catch and is designed with a genuine GLUPAC® pheromone impregnated which glue board.
Tool-free maintenance, easy to clean and replace lamps.
All metal construction – white polyester coating.
Guarantee – 5 years (excludes globes)
Wall mounted or free standing.
Recommendations for placement and installation as by Supplier:
Firstly the height at which IND35 are to be installed is important in terms of efficiency.
As a general rule the higher up they are the less effective.
In a working environment, the ideal height would be between two and two and a half metres from the ground.
At this height, the risk of the units being damaged by moving trolleys or forklift trucks is reduced whilst maintaining maximum efficiency. They will also be easier to clean and maintain.
The ideal location is at right angles to the major light source in the room.
The IND35 must not be sited so that the light source is obscured (if flying insects cannot see it the unit will not be very effective).
The site between potential entry points and production areas to intercept pests before they reach sensitive areas.
Do not rely on the area of coverage of a particular unit as the only criteria for choosing and installing the IND35. There are several factors that need to be considered before deciding on the appropriate number and size of units to be installed. These would include the number of entry points including doors, windows and any other openings for instance for pipework or extractor fans.
What is the volume of human traffic through the area to be protected?
What would be the normal flying insect population?
What is being produced?
And where is the facility located? If it is close by a lake or a rubbish tip then there will be a greater risk than if the facility is in the middle of an industrial estate.
The IND35 should not be installed in areas where they can be affected by air currents.
Avoid areas close to air conditioning vents or where draughts may be a problem.
This is because flying insects, on the whole, do not like moving air and IND35 Fly Lights placed in these areas may be less efficient.
The IND35 are often placed directly in front of doorways – the logic of the installer is that this is where the insects enter and so they will be more easily caught.
In fact, this will only encourage insects to enter and make the problem worse.
It is better to install the IND35 off to the side of doorways ensuring as much as possible that the light does not shine out of the open door.
Never ever install the IND35 directly above a processing line or food preparation area.
The Ultra Violet lamps are highly attractive to flying insects and will attract the insects to those areas. Better to install the units away from sensitive areas to attract the insects and kill them away from the critical areas to be protected.
Don’t forget to change the lamps every 12 months – preferably just before the start of the fly season.
Small, Medium, Large